• Home
  • Products
  • RC8-FS Smart Fingerprint Sensor Remote

RC8-FS Smart Fingerprint Sensor Remote

The all new AVE RC8-FS HMI integrates a smart capacitive biometric fingerprint sensor directly into the HMI’s control panel. With this enhanced fingerprint recognition system, the RC8-FS only allows authorized riders access to system startup ignition and electronic lock to operate the e-vehicle.

The AVE RC8-FS comes equipped with a Bluetooth BLE 5.x interface and 4x RGB multi-color backlight illuminated buttons for Assist Mode Selection, Walk Mode, Light Control, General Settings and System Power On/Off.

The AVE RC8-FS is designed to be used combination with CD9, CD8, TT10, TT09 or TT07 but, can also be used as a standalone remote for entry level e-Vehicle applications. It is suitable for e-Bikes, e-Mopeds, Electric Scooters and others.

Sensors such as Windspeed, Altitude, and 6-Axis Gyro are assembly options. In combination, these three sensors are an alternative solution to regular Torque sensor and the PB-Sensor  Technology (Developed jointly by AVS Electronics and VELOCOMP LLC). PB-Sensor Technology is a revolutionary new way of measuring a rider's power/torque on e-Vehicles. A Temperature Sensor, Humidity Sensor or NFC are additional options on request.

The Remote is available in Pantone Black (Body) and Cool Silver (Buttons) with other colors on request. Its compatible with most open drive systems and supports CAN/CANopen, UART, RS-232, RS-485 and LIN Bus.

Button Backlight 4 (Single-Color)
Fingerprint Sensor Capacitive Biometric Fingerprint Sensor (Up to 50 Fingerprints)
Light Sensor Yes
Wind Sensor Yes (Option)
Baro Sensor Yes (Option)
Gyro Sensor Yes (Option)
PB-Sensor Option: Requires Wind, Baro and Gyro Sensor
Humidity Sensor Yes (Option)
Bluetooth BLE 5.x (Option)
Memory Up To 32MB
Interface CAN/CANopen, UART, RS-485, RS-232, LIN
Power (Wide VIN Range) 7 - 55V
No. of Buttons (Total)
Assist Up
Assist Down
NFC Yes (Option)
Standard Configuration Combines With CD9, CD8, TT10, TT09 or TT07
Suitability e-Scooter, e-Bike, e-Moped, Light Electric Motorcycle and Others
Mounting Method Hinge, 2x M4 Screw
Mounting Location Handlebar (Left or Right Sides) (Near Grip)
IP Level IP56
Storage Temperature -20° to +60°C
Operating Temperature -10° to +50°C
Connector AVS 6-Pin (Others on Request)
Dimensions (W x D x H) 53mm x 46mm x 54mm** (2.1” x 1.8” x 2.1”**)
Weight 42g (1.5oz)
Color Housing: Pantone Black
Buttons: Cool Silver
Packaging Bulk
Warranty (Standard) 1 Year
Certifications CE, RCC, RoHS/ReACH, EN 13849

** Note: Max Thickness
User Interface
Multicolor RGB Button Backlight for:
  • Power On/ Off Status
  • BLE Bluetooth Status
  • Assist Mode Indicator
  • Walk Mode Status
  • Battery Low (≥10%) Warning Light
  • System Error Indicator
  • Optional Configuration
    • PB-Sensor (Torque Measurement)
    • NFC (Bluetooth Pairing, Unlock)
    • Humidity Sensor (Humidity Measurement)
    • Temperature Sensor (Ambient Temperature Measurement)
  • Compatibility

    The RC8-FS is compatible with most open Drive Systems and Controllers such as from PANASONIC*, SHIMANO*, BAFANG, BROSE*, BMZ, LISHUI, SHENGYI, DAPU, ARIX, HEINZMANN, EAGOTECH, ASI* and others.

    * Available on request

  • Mounting

    Ø22.2mm Clamp-type with rubber padding and 2x M4 stainless steel screws